КЛК 'Владминес'
29 Март 2024, 02:38:08 *
Добро пожаловать, Гость. Пожалуйста, войдите или зарегистрируйтесь.
Войти
Лучшие фелинологические организации!
Добавье свою организацию! пока бесплатно!!!
Новости: На сайте работает раздел Наши чемпионы! Все чемпионы и чемпионки семейства кошачьих :)
 
   Начало   Помощь Поиск Календарь Галерея  
Страниц: [1]
  Печать  
Автор Тема: OIL-FREE ROTARY VANE VACUUM PUMPS  (Прочитано 1889 раз)
0 Пользователей и 1 Гость смотрят эту тему.
upamfva
Ветеран
********

Кошачьих сил: 134
upamfva is awe-inspiring!upamfva is awe-inspiring!upamfva is awe-inspiring!upamfva is awe-inspiring!upamfva is awe-inspiring!upamfva is awe-inspiring!upamfva is awe-inspiring!upamfva is awe-inspiring!upamfva is awe-inspiring!upamfva is awe-inspiring!upamfva is awe-inspiring!upamfva is awe-inspiring!
Offline Offline

Сообщений: 2289

Благодарности
-Выражено: 0
-Получено: 0


Просмотр профиля Email
« : 26 Сентябрь 2022, 09:50:53 »

OIL-FREE ROTARY VANE VACUUM PUMPS



This rotor is equipped with grooves in which the vanes are inserted. Because of the centrifugal force, during the rotation the vanes are pushed into contact with the body, creating close spaces that increase their volume drawing air from the container to be emptied and expelling it from the “outlet duct”. Oil-free rotary vane pumps can run continuously both at atmospheric pressure and at the highest vacuum. However, they cannot be used when the aspirated air contains moisture, oil or other traces of liquid.Get more news about Oil-free Rotary Vane Compressor,you can vist our website!
In a pump that is too cool for a given process, aggressive vapors may condense, leading to corrosion, the dilution of lubricants, and the swelling of seals.  This damage is serious but can only happen if the vapor is allowed to condense into the liquid phase.

Conversely, if the operating temperatures in the pump are too high for a given process, unwanted reactions such as polymerization or auto-ignition are possible, with the addition of high bearing temperatures or thermal seizure.

The effects mentioned above can be mitigated slightly by internal coatings but this is something that should never be relied on. Coatings work great to protect the pump during initial storage and system commissioning but they can only survive so long at the temperatures and vacuum levels where the pumps spend most of their time.

The key is to ensure that the process vapors stay in the vapor phase [Green area] in the figure below.  A few strategies to ensure this occurs include temperature/flow control of the pump coolant, use of nitrogen purge to change process dew point, and the use of inlet condensers to remove the vapor upstream of the pump.  

To further improve reliability where system challenges are always present, additional features can be added to the pump system to help guarantee reliability. One example is a solvent flush system to keep the pumping mechanism free and clean. Another being knock-out pots (KOPs) and filters to capture liquid or powder slugs when unable to prevent them.
Записан
Страниц: [1]
  Печать  
 
Перейти в:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.11 | SMF © 2006, Simple Machines LLC Valid XHTML 1.0! Valid CSS!